
Seedance 2.5 Flash Pricing
Calculate Seedance 2.5 Flash pricing for a five-second shot. Compare text, reference footage and edits using the live 480p and 720p rates.
Five seconds of a ceramic cup turning on a table can have three different prices. Describe it in words and Wan API bills five seconds at the rate without video input. Supply three seconds of footage to guide the turn and the same output uses ten billable seconds at the video-input rate. Edit a source clip that lasts 5.2 seconds and the bill uses twelve. To put a dollar amount on any of those shots, multiply its billable seconds by the corresponding rate below. Model page and Playground
| Resolution | Without video input | With video input |
|---|---|---|
| 480p | Unavailable | Unavailable |
| 720p | Unavailable | Unavailable |
The table shows the current Wan API selling price in US dollars. Pick the resolution you intend to deliver, then choose the column that describes what goes into the model. Every result in this guide is a video, including the ones that use the rate without video input. A reference photograph and a reference movie sit in different columns, even if both show exactly the same cup.
A photograph costs the same as a prompt of the same duration
Imagine that the cup belongs to a client. In the first version you write “a white ceramic cup turns slowly on a wooden table.” In the second you supply the client's photograph as the opening frame and ask for the same movement. At a fixed resolution and five seconds of requested output, both versions use five times the no-video rate. Adding an image for the last frame changes the direction you give the model. It leaves that multiplication alone.
The choice between 480p and 720p matters when you multiply. Say you're sending two candidates to the client. One four-second test at 480p and one five-second take at 720p cost four times the 480p rate plus five times the 720p rate. Applying a single rate to all nine seconds would give the wrong total. The shortest generation you can request is four seconds. If the shot calls for a pause before the cup starts moving, allow time for that pause in the requested output.
For a silent product loop, turn off generated audio. The charge remains the same. An audio reference can guide a generation without moving it into the video-input column. Check the files attached to the request if the preview shows a different column from the one you expected. A movie used only to convey a rhythm still counts as a video input.
What happens when you add reference footage
Now suppose the client sends a three-second movie of the turntable. You want five seconds of new footage and attach that movie as a reference. The gateway counts the five output seconds, then adds a reference allowance. That allowance is the greater of the output duration and the combined input video duration rounded up to a whole second. Here the allowance is five seconds. Add it to the five seconds of output and you have ten to multiply by the video-input rate.
| Material supplied | Requested output | Billable seconds | Rate to use |
|---|---|---|---|
| Prompt and a photograph | 5 seconds | 5 | Without video |
| One 3-second reference | 5 seconds | 10 | With video |
| Two references of 2.4 seconds each | 5 seconds | 10 | With video |
| One 8-second reference | 5 seconds | 13 | With video |
| One 5.2-second source in edit mode | Source duration | 12 | With video |
Read the two middle reference examples carefully. Two clips lasting 2.4 seconds each add up to 4.8 seconds. Round that total once and the input side comes to five seconds. Rounding each file separately would overstate the bill. The eight-second reference, on the other hand, exceeds the requested output. The input side then contributes eight seconds and the output side contributes five.
This gives you a practical editing decision before submission. If only the first five seconds of an eight-second reference show the camera movement you need, cutting off the remaining three seconds brings the billable total down from thirteen to ten. Trimming the reference further from five seconds to three would leave the total at ten. Below that threshold, choose the excerpt that explains the movement most clearly.
Keep the duration of an existing take and change its appearance
The director approves the movement of the white cup but wants blue glaze. If you already have a suitable clip, use edit mode and send one source video. The output follows its duration. Count the source seconds, round up once and double the result. A five-second source uses ten billable seconds. With a source just over five seconds, the rounded length is six and the bill uses twelve seconds at the chosen resolution's video-input rate.
A time label in an editing application can hide that difference. A file you call “the five-second take” might include a few extra frames after the cup stops. If the client needs those frames, include them in your estimate. If the cut must end earlier, trim the file, export it and check the duration of the exported movie before attaching its URL. Setting a desired output length in the edit request cannot perform that trim. The Flash API reference lists the accepted source durations and edit fields.
Budget the takes you plan to submit
Consider a short production with two framing tests, two motion tests and an edited delivery. Start with two four-second text generations at 480p. Those consume eight seconds at the 480p no-video rate. For the motion tests, request two five-second outputs at 720p with a three-second reference attached to each. Each task uses ten billable seconds, so reserve twenty seconds at the 720p video-input rate. Finally edit one selected five-second source at 720p. That adds ten more seconds at the same rate.
The budget for that sequence comes to eight times the 480p no-video rate plus thirty times the 720p video-input rate. The client receives one five-second deliverable. Your budget pays for the work required to select and finish it. If the client's notes call for one more blue-glaze edit on that same source, add ten seconds at the latter rate. If they call for a fresh text concept, add the cost of that separate text request instead. Multiplying the entire project budget by two would exaggerate what one revision costs.
A small shot list is enough to keep these decisions visible. Give each candidate its own row with the intended resolution, mode, requested seconds and reference or source length. Record the number of takes beside those values. Split a row when any of them changes. You can then answer “what would another angle cost?” without calculating the original shoot all over again.
Read a quote from another service in the same units
A number quoted in credits only becomes a dollar comparison once you know what those credits cost and what settings they buy. For a monthly plan, divide the amount you actually pay by the number of usable shots you expect from it. If you pay for a month to finish one job, credits left unused still count toward that job's cash cost. Check any use limits attached to the word “unlimited,” including the eligible model, resolution and clip duration.
On Wan API the table applies to the specific model ID bytedance/seedance-2.5-flash. A quote for Seedance 2.5, 2.0 or Mini describes another model. Match the model, the output size and the input mode before comparing the price of a second. A video-input rate can look attractive in isolation, but the reference allowance means there can be more billable seconds than finished seconds. For a five-second text-only shot the arithmetic starts with five. For a five-second shot with a short reference it starts with ten.
You can check an estimate in the Seedance 2.5 Flash Playground before deciding to spend. Submitting a task draws on the account's available balance. If the client is still deciding between two versions, preview both sets of parameters first. Once you submit a take through the API, keep its returned task ID. Use that ID to check progress and retrieve the result. Repeating the generation request would ask for another take and could incur another charge.
More Posts

Wan 3.0 API guide: models, inputs, and your first video
Compare Wan 3.0, Wan 3.0 Prime, Wan 3.0 Pro and Wan 3.0 Prime Pro API inputs and video output specifications, then prepare a focused first integration test.


Seedream 5.5 API tutorial: generate, edit and split images
Call Seedream 5.5 once, poll its task, edit with references, create transparent PNGs and split images into layers. Check output sizes and live image prices.


Seedream 5.0 Pro layer separation: what it returns and how it is billed
How Seedream 5.0 Pro layer separation works through the API: input rules, size options, the layer data it returns, and per-layer billing you can check first.

Wan API updates
Service updates and model news
Sign up for model news, service updates and API integration information.